I am in need of help and you may just be the man .. IK have the only 4x4 panda mk1 .. 1995 its an ie with single point inj. .. I am re assembling it and for some reason I have made an error and not taken note of 2 wires and their location .. there are 2 green/ black together with an 8mm eye and a white/black with a 6mm eye they are together out of the same loom as the rest of the engine terminals (i.e. temp sender coils etc ) .. they give the impression of being from the alternator but are not as they are simple to work out and are present .. I have tried many sources to find a wiring diagram but to no avail ... can you help ? I would send an e-mail with a picture if I had your e-mail address