Return to Website

WELCOME TO THE INVICTA KENT FORUM

PLEASE USE YOUR FULL NAME, ANONYMOUS POSTINGS WILL BE DELETED

WELCOME TO THE INVICTA KENT FORUM
Start a New Topic 
Author
Comment
View Entire Thread
Re: 25mm Box Section Roll Cages

25mm box should be gone by 2015.But I have heard they might change there minds again!!! if I were you or anybody building a new car I would not use 25mm cage because it will change!a.s.a.p, ok you have been warned.

Re: 25mm Box Section Roll Cages

does that include the floor frame,or is that ok..

Re: 25mm Box Section Roll Cages

good question ron! I would not build a new cage with any 1"box because they have said that it wont be allowed as any part of a roll cage! you make your own mind up,and I will wait for more information,

Re: 25mm Box Section Roll Cages

Thanks Mick....agreed, I wouldn't build a new cage but as I am already running 1" box.....as the rule change isn't planned to be in force until the start of 2015, I'll put the angle grinder on ice ....... at least until the 2014 rule book comes out and it says otherwise. Thanks, Mickey

Re: 25mm Box Section Roll Cages

coward!!!

Re: 25mm Box Section Roll Cages

The floor frame comes under the same rules as the roll cage and must be changed to equivalent tube type or 30mm box section for 2015.

This will obviously include any floor bars where they join a roll cage upright. The door bars are also subject to this new rule.